Melt settings – Sony Multi Interface Shoe Adapter User Manual
Page 527

527
DME Special Effect Operations
Chapt
To make the tip of the swirl stardust
1
Press [Pixel], turning it on.
2
Set the following parameters.
To set the center position of the swirl
1
Press [Position], turning it on.
2
Set the following parameters.
a) Setting for SD 4:3, SD 16:9
b) Setting for HD 4:3, HD 16:9
Melt settings
You can set the degree of transition, the degree of extension in the image, the
jaggedness of the melting sections, and the amplitude, frequency, amount of
movement, and speed of the melting sections. You can also set the slant of the
borders, the shape of the sections that begin to melt, and other parameters.
To apply the Melt effect
With the Melt menu displayed, use the following procedure.
1
In the
away.
Up:
Melting occurs upward.
Down:
Melting occurs downward.
4
Area
Region of swirl
0.00 to 100.00
Knob
Parameter
Adjustment
Setting values
Knob
Parameter
Adjustment
Setting values
1
Density
Degree to which image
disappears
0.00 to 100.00
2
Random
Trail type and amount of stardust
0.00 to 100.00
Knob
Parameter
Adjustment
Setting values
1
H
Horizontal center position of swirl –8.000 to +8.000
a)
–32.000 to +32.000
b)
2
V
Vertical center position of swirl
–6.000 to +6.000
a)
–18.000 to +18.000
b)