Sony Multi Interface Shoe Adapter User Manual
Page 225
225
Wipe Settings for Independent Key Transitions
Chapt
The buttons in the device control block are assigned to the wipe position
setting as follows.
Table 1: Buttons and assigned settings
Table 2: Buttons assigned to functions
2
Press one of the buttons in Table 1 above, to select the wipe position to
which the operation applies. Multiple selection is possible.
3
Press the [POS] button, turning Position on.
4
Move the trackball or joystick, to set the wipe position. By pressing the [X]
button, turning it on, you can restrict movement to the horizontal direction,
and by pressing the [Y] button, turning it on, you can restrict movement to
the vertical direction.
To set the wipe position by a menu operation
1
Press [Position] in the Key1 Wipe Adjust menu, turning it on.
2
Set the following parameters.
a) See page 217.
To move the pattern from its current position to the center through
the course of a transition
Press [Auto Center] in the
Button name
Setting
K1 CB1
Wipe position for independent key 1 transition
K2
Wipe position for independent key 2 transition
K3
Wipe position for independent key 3 transition
K4
Wipe position for independent key 4 transition
Button name
Function
POS
Toggle Position on or off.
X, Y
Fix the operating direction.
CTR
Return the pattern position to the center of the screen.
Knob
Parameter
Adjustment
Setting values
1
Position H
Horizontal position
–200.00 to +200.00
a)
2
Position V
Vertical position
–200.00 to +200.00
a)