Setting the side flag video material and operation – Sony Multi Interface Shoe Adapter User Manual
Page 956
Chapt
956
Settings for Switcher Configuration (Config Menu)
2
Using either of the following methods, select the M/E or PGM/PST bank
for which you want to set a DME channel assignment.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
3
In the
on, to select the channel which you want to assign to the bank selected in
step
2
.
4
Repeat steps
2
and
3
to assign DME channels to other banks.
Setting the Side Flag Video Material and Operation
Make settings relating to the video material (4:3 aspect ratio) for applying side
flags.
For details of side flag operations, see “Side Flag Settings” in Chapter 10
(Volume 1).
Setting the aspect ratio (4:3/16:9)
1
In the Switcher >Config menu, press [Side Flags].
The Side Flags menu appears.
The status area lists the video/key pair numbers, video signal source
names, and aspect ratio settings (16:9/4:3).
2
Using any of the following methods, select the pair number for which you
want to make the setting.
• Press directly on the list in the status area.
• Use the arrow keys to scroll the reverse video cursor.
• Turn the knobs.
• To select all of the pair numbers, press [ALL].
3
In the
If you select [16:9], no side flags are applied.
Knob
Parameter
Adjustment
Setting values
1
V/K Pair No
Selection of a V/K pair by its
number in the list
1 to 128
3
Num
Selection of number of V/K pairs
in the list
1 to 128