Sony Multi Interface Shoe Adapter - Manual (Page 559)

559
DME Special Effect Operations
Chapt
er
11
DME Ope
ra
tions
Notes
• If you select [Multiply] in the group of the Light
Color Adjust menu (see page 561) , the light effect is not applied to the
background, even if you select BKGD or Both.
• If the setting of [Brilliancy] in the group of the Light Color
Adjust menu (see page 561) is 100.00, the light effect is not applied to the
background, even if you select BKGD or Both.
• When the global effect Combiner is set to Mix or Depth, the light effect is
not applied to the background, even if you select BKGD or Both.
To select Surface Flat
Press [Surface Flat], turning it on.
If you have selected anything other than Flat in the group of
the Spot Lighting menu, the part corresponding only to the surface being struck
by the currently set light from the light source is shown in the same way as if
Flat had been selected.
To set the shape of the light
1
Press [Shape], turning it on.
2
Set the following parameters.
• SD format
a) For more information about the shape patterns, see “Shape Patterns” (page 809) in the
Appendix.
b) 0 is a round shape, and 100 is the shape itself. Smaller values make the pattern more
rounded.
c) – 1.00 is one rotation in the counterclockwise direction. +1.00 is one rotation in the
clockwise direction.
• HD format
Knob Parameter Adjustment Setting values
1 Shape Ptn Shape pattern
1 to 2
a)
2 Size Shape size 0.00 to 6.00
3 Deform Amount of shape deformation
0.00 to 100.00
b)
4 Soft Softness of shape pattern 0.00 to 100.00
5 Angle Angle of shape pattern rotation
–8.00 to +8.00
c)
Knob Parameter Adjustment Setting values
1 Shape Ptn Shape pattern
1 to 2
a)
2 Size Shape size 0.00 to 24.00
3 Deform Amount of shape deformation
0.00 to 100.00
b)
4 Soft Softness of shape pattern 0.00 to 100.00