beautypg.com

Creating tables 1 to 14 – Sony Multi Interface Shoe Adapter User Manual

Page 903

background image

903

Cross-Point Settings (Xpt Assign Menu)

Chap

te

r 1
9

Cont

ro

l P
a

n

e

l

Set

u

p

(

P

a

nel)

• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.

5

Using the buttons in the group, assign the selected signal to
the button number currently selected in the main table.

Set:

Delete the signal currently assigned to the selected button number and

make a new assignment.

Insert:

Move down one line the signal currently assigned to the selected

button number and following signals, and make a new assignment.

Note

When a button number in the range 121 to 128 is selected, execution of
“Insert” is impossible. The signal assignments to button numbers 121 to
128 cannot be changed. When “Insert” is executed for any other number,
moving down of signals ends at number 120, and the signals assigned to
numbers 121 to 128 are maintained in their original lines.

To disable a button

In the Panel >Xpt Assign >Main, V/K Pair Assign menu, select the button you
want to disable, and press [Inhibit].

To delete any currently assigned signal

In the Panel >Xpt Assign >Main, V/K Pair Assign menu, select the button
corresponding to the signal you want to delete, and press [Delete] in the Assign> group.
Signal deletion is executed in accordance with the selection in the
group, and the signal assigned to the button number next to the selected button
number and following signals move up one line.

Note

When a button number in the range 121 to 128 is selected, execution of
“Delete” is impossible. The signal assignments to button numbers 121 to 128
cannot be changed. When a signal assigned to any other button number is
deleted, moving up of signals ends when the signal assigned to number 120 has
moved to number 119, and the signals assigned to numbers 121 to 128 are
maintained in their original lines.

Creating tables 1 to 14

When creating tables 1 to 14, in the same way as when creating the main table,
you can assign the same signal to more than one button number, or delete

Knob

Parameter

Adjustment

Setting values

3

Source No

Selection of source to be assigned

1 to 128