Sony Multi Interface Shoe Adapter - Manual (Page 492)

Cha
p
te
r 11
DME
O
per
at
ion
s
492
DME Special Effect Operations
5
If you selected other than Sharp in step 3 , depending on the necessity,
proceed as follows.
• To adjust the outline color for Edge Color or Draw
Turn [Edge Matte] on and set the following parameters to set the outline
color.
• To set the color of the sections other than the outlines for Draw
Press [Matte], turning it on, and adjust the following parameters to set the
color of the sections other than the outlines.
• To select the signal to mix with the relief pattern for Relief
In the group, select the signal to mix with the relief
pattern.
Matte: Select a single color. The following parameters can be adjusted.
Video: Select the input video signal.
6
To invert white and black in the extracted video, or to invert the outlines
and the sections other than the outlines, press [Nega], turning it on.
Masking the Sketch effect with a selected pattern
Press [Mask] to display the Mask menu and set the type of pattern and
modifiers.
For details, see “Mask Settings” (page 496).
5 Coring Minimum value of edge to
emphasize 0.00 to 100.00
Knob Parameter Adjustment Setting values
Knob Parameter Adjustment Setting values
1 Luminance Luminance 0.00 to 100.00
2 Saturation Saturation 0.00 to 100.00
3 Hue Hue 359.99 to 0.00
Knob Parameter Adjustment Setting values
1 Luminance Luminance 0.00 to 100.00
2 Saturation Saturation 0.00 to 100.00
3 Hue Hue 359.99 to 0.00
Knob Parameter Adjustment Setting values
2 Saturation Saturation 0.00 to 100.00
3 Hue Hue 359.99 to 0.00