Sony Multi Interface Shoe Adapter - Manual (Page 969)

969
Signal Output Settings (Output Menu)
Cha
p
te
r 20
Swi
tc
h
e
r S
e
tup (Swit
c
her
)
• Aux 1 to 48 outputs
• Program outputs of the M/E and PGM/PST rows
• Clean outputs of the M/E and PGM/PST rows
Making safe title settings
1
In the Switcher >Output menu, press [Safe Title].
The Safe Title menu appears.
The status area shows the output ports and the assigned signals, with the
box 1, box 2, cross, and grid states.
2
To enable the safe title on/off setting made in the Misc menu, press [Safe
Title], turning it on.
3
Carry out either of the following operations.
To display a box: Press [Box1] or [Box2], turning it on.
In this case, carry out the following steps 4 and 5 .
To display a cross: Press [Cross], turning it on.
To display a grid: Press [Grid], turning it on.
In this case, carry out the following steps 4 and 5 .
4
When you selected [Box1] or [Box2] in step 3 , adjust the following
parameters.
a) Adjustable for Box2
When in step 3 you selected [Grid], in the group, select one
of the following.
80.00%: Set the grid size to 80% of the screen frame
85.00%: Set the grid size to 85% of the screen frame
90.00%: Set the grid size to 90% of the screen frame
100.00%: Set the grid size to the full-screen size (100% of the screen
frame)
5
When in step 3 you selected [Box1] or [Box2], in the or
group, select the screen aspect ratio (16:9/14:9/4:3).
When in step 3 you selected [Grid], in the group, select the
screen aspect ratio (16:9/4:3).
Knob Parameter Adjustment Setting values
2 Box Size Box size 50.00 to 100.00
3 Luminance Display brightness
0.00 to 100.00
a)