Sony Multi Interface Shoe Adapter - Manual (Page 485)

485
DME Special Effect Operations
Chapt
er
11
DME Ope
ra
tions
Masking the Blur effect with a selected pattern
Press [Mask] to display the Mask menu, and set the pattern type and modifiers.
For details, see “Mask Settings” (page 496).
Multi Move Settings
Applying the Multi Move effect
1
In the DME menu, select VF2 ‘Video Modify’ and HF2 ‘Multi Move.’
The Multi Move menu appears.
2
Press [Multi Move], turning it on.
The Multi Move effect is enabled. You can adjust the center point of
shrinking, the ratio of shrinking, and the aspect ratio of the shrunken
images with the knobs.
3
Set the parameters.
The valid ranges of the parameter values depend on the combination of
signal format (SD/HD) and aspect ratio (4:3/16:9) selected in the system,
as follows.
• 4:3 mode
a) Specify minus values to stretch the image in the vertical direction, and plus values to
stretch the image in the horizontal direction.
• 16:9 mode
Knob Parameter Adjustment Setting values
1 Center X x-value of shrinking center point –4.00 to +4.00 (SD)
–12.00 to +12.00 (HD)
2 Center Y y-value of shrinking center point –3.00 to +3.00 (SD)
–9.00 to +9.00 (HD)
3 Size Shrinking ratio 0.00 to 100.00
4 Aspect Aspect ratio of shrunken images –100.00 to +100.00 a)
Knob Parameter Adjustment Setting values
1 Center X x-value of shrinking center point –4.00 to +4.00 (SD)
–16.00 to +16.00 (HD)
2 Center Y y-value of shrinking center point –2.25 to +2.25(SD)
–9.00 to +9.00 (HD)