Selecting the signal for the afterimage portion – Sony Multi Interface Shoe Adapter User Manual
Page 544

Cha
544
DME Special Effect Operations
2
Press [Wind], turning it on.
This enables the wind, and you can now adjust the parameters with the
knobs.
3
Set the following parameters.
a) 0.00 represents no afterimage, and 100.00 represents no decay in the afterimage.
4
To erase the afterimages, press [Wind Eraser], turning it on.
Selecting the signal for the afterimage portion
In the
Notes
• “Mix Color”or “Ext Video”can only be applied to one of the background
, flex shadow
, trail
, and wind effects.
If you select “Mix Color”or “Ext Video” in the wind settings, a selection of
“Mix Color”or “Ext Video” in any of the other effects is disabled, and “Flat
Color” is selected in its place.
• When executing combining four channels of DME images, “Mix Color” and
“Ext Video” cannot be selected.
Freeze Video:
Freeze the input image to use as the afterimage.
Flat Color:
Use a single color matte for the afterimage; you can set the
following parameters with the knobs.
Hue Rotate:
Use a single color matte with the hue changing for each frame as
the afterimage; you can set the following parameters with the knobs.
Knob
Parameter
Adjustment
Setting values
1
Decay
Amount of afterimage
displayed
0.00 to 100.00
a)
2
Shift H
Extension in the horizontal
direction
–100.00 to +100.00
3
Shift V
Extension in the vertical
direction
–100.00 to +100.00
Knob
Parameter
Adjustment
Setting values
1
Luminance
Luminance
0.00 to 100.00
2
Saturation
Saturation
0.00 to 100.00
3
Hue
Hue
359.99 to 0.00
Knob
Parameter
Adjustment
Setting values
1
Luminance
Luminance
0.00 to 100.00