Selecting key source – Sony Multi Interface Shoe Adapter User Manual
Page 188

188
Key Setting Operations With the Key Control Block
Chap
When using a color matte:
Press the [MATTE FILL] button, setting it on. The
button lights green, and you can now set the parameters with the knobs.
When [Mix Color] is selected in the key fill Matte Adjust menu, you can
further adjust color 2.
When [Mix Color] is on, and the [MORE] button is lit amber
When [Mix Color] is on, and the [MORE] button is lit green
When using the key fill bus signal:
Press the [MATTE FILL] button, turning
it off.
To select the key fill signal, use the key bus buttons in the cross-point
control block.
Selecting key source
• To use the key source paired with the key fill signal selected on the key fill
bus, press the [AUTO SEL] button, turning it on. The pairing of the cross-
point buttons for key fill and key source is carried out in the Setup menu.
(See
“Cross-Point Settings (Xpt Assign Menu)” in Chapter 19 (Volume 3).)
• To select key source independently of the key fill signal selected on the key
fill bus and paired with key source, hold down the key delegation button
[KEY1], then press the desired key row button in the cross-point control
block.
• To use as key source the same signal as the key fill signal selected on the key
fill bus, select the SELF mode by pressing the [AUTO SEL] button and
Knob
Parameter
Adjustment
Setting values
1
Luminance
Color 1 luminance
0 to 100
2
Saturation
Color 1 saturation
0 to 100
3
Hue
Color 1 hue
359 to 0
Knob
Parameter
Adjustment
Setting values
1
Luminance
Color 1 luminance
0 to 100
2
Saturation
Color 1 saturation
0 to 100
3
Hue
Color 1 hue
359 to 0
4
Size
Pattern size
0 to 100
Knob
Parameter
Adjustment
Setting values
1
Luminance
Color 2 luminance
0 to 100
2
Saturation
Color 2 saturation
0 to 100
3
Hue
Color 2 hue
359 to 0
4
Soft
Edge softness
0 to 100