Sony Multi Interface Shoe Adapter - Manual (Page 132)

132
Executing a Transition
Chapt
er
3
S
ign
al Sele
c
tio
n
a
nd T
ran
s
itio
n
s
• Enter a value of up to three digits.
• To clear the entry, press the [CLR] button.
4
Press the [ENTER] button.
This confirms the entry, and the selected region name and the set transition
rate appear in the numeric keypad control block display.
The transition control block display of the same bank (M/E or PGM/PST)
also shows the setting.
To enter a difference from the current value
After pressing the [+/–] button, enter the difference and press the [TRIM]
button.
To change the sign (+ or –), press the [+/–] button.
Setting the transition rate by a menu operation
1
In the switcher bank, select first VF7 ‘Misc’, then HF1 ‘Transition.’
The Transition menu appears.
2
Select any transition type in the group.
3
Turn the knob to set the transition rate.
Displaying the transition rates in a menu and changing the
settings
For each of the M/E and PGM/PST banks, you can display the transition rate
and independent key transition rate, and change the settings.
For more details, see “Displaying a List of Transition Rates and Changing the
Settings” (page 331).
Pattern Limit
When a wipe or DME wipe pattern is selected for the transition, you can
specify the range of movement of the wipe pattern through the course of the
transition, for each bank independently.
When the pattern limit function is enabled, carrying out a transition results in
the following effect for example settings.
Knob Parameter Adjustment Setting values
1 Transition Rate Transition Rate 0 to 999 (frame count)