Sony Multi Interface Shoe Adapter - Manual (Page 904)

Ch
apt
er 19
C
o
nt
rol P
ane
l
S
e
tup (P
an
el)
904
Cross-Point Settings (Xpt Assign Menu)
currently assigned signals. However, assignment of video and key
combinations is impossible.
1
In the Panel >Xpt Assign menu, press [Table Button Assign].
The Table Button Assign menu appears.
The table number appears on the upper left part of the status area.
The left part of the status area shows the cross-point button numbers, video
and key pair numbers, video signal source names and source numbers, and
key signal source names and source numbers. When the shift button is
pressed, the number column is distinguished by color.
The right part shows the video and key pair numbers, and the names of
video signals and key signals set in the main table.
The Table Button Assign menu also allows you to access the Main, V/K
Pair Assign menu and the Src Name/LCD Color menu.
2
Using the knob, select the table number.
3
Using any of the following methods, select the button number.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
4
Using any of the following methods, select the pair number.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
5
Using the buttons in the group, assign the selected pair
number to the button number currently selected in table 1.Set: Delete the signal currently assigned to the selected button number and make a new assignment.Insert: Move down one line the signal currently assigned to the selected button number and following signals, and make a new assignment.KnobParameterAdjustmentSetting values1Table NoSelection of the table to be set1 to 14KnobParameterAdjustmentSetting values2Button NoCross-point button selection1 to 128KnobParameterAdjustmentSetting values3V/K Pair NoSelection of video and key pair
number to be assigned1 to 128
Set: Delete the signal currently assigned to the selected button number and
make a new assignment.
Insert: Move down one line the signal currently assigned to the selected
button number and following signals, and make a new assignment.
Knob Parameter Adjustment Setting values
1 Table No Selection of the table to be set 1 to 14
Knob Parameter Adjustment Setting values
2 Button No Cross-point button selection 1 to 128
Knob Parameter Adjustment Setting values
3 V/K Pair No Selection of video and key pair
number to be assigned 1 to 128