beautypg.com

Settings for the show key function, Settings for key auto drop function – Sony Multi Interface Shoe Adapter User Manual

Page 975

background image

975

Settings Relating to Keys, Wipes, Frame Memory and Color Correction (Key/Wipe/FM/CCR Menu)

Cha

p

te

r 20

Swi

tc

h

e

r S

e

tup (Swit

c

her

)

Settings for the Show Key Function

1

In the Switcher >Key/Wipe/FM/CCR menu, press [Show Key].

The Show Key menu appears.

2

In the group, press the signal for which “show key”
is enabled, turning it on.

3

To set the time for which “show key” is held, press [Hold Time].

4

Adjust the following parameter.

Settings for Key Auto Drop Function

The “key auto drop” function automatically switches off a particular key when
you press a cross-point button in a bus that outputs the background on the
particular switcher bank (PGM/PST, or M/E-1 to M/E-3).
When the background output bus is in flip-flop mode, this is always the A bus.
In bus-fixed mode, it is either the A bus or the B bus depending on the fader
lever position.

For details of bus-fixed mode, see “Executing a Transition” in Chapter 3
(Volume 1).

1

In the Switcher >Key/Wipe/FM/CCR menu, press [Key Auto Drop].

The Key Auto Drop menu appears.

Knob

Parameter

Adjustment

Setting values

1

Hold Time

Show key hold time

0 to 999 (frames)