Sony Multi Interface Shoe Adapter - Manual (Page 603)

603
Control of VTRs, Extended VTRs, and Disk Recorders
Chap
te
r 1
2
Ex
te
rnal
De
v
ic
e
s
Example 1
1
Press the [SET START TC] button, and enter “00000000” from the
numeric keypad control block.
2
Press the [SET STOP TC] button, and enter “200” from the numeric
keypad control block. This automatically sets DUR.
3
Press the [SET DUR] button, and enter “–100” from the numeric keypad
control block.
START TC remains the same, and STOP TC changes.
a)
Example 2
1
Press the [SET DUR] button, and enter “200” from the numeric keypad
control block.
2
Press the [SET STOP TC] button, and enter “01000000” from the numeric
keypad control block.
This automatically sets START TC.
3
Press the [SET STOP TC] button, and without entering anything from the
numeric keypad control block, press [Enter].
The STOP TC display, and the START TC display automatically
calculated in step
2 disappear, and the setting of the DUR does not change.
START TC
STOP TC
(DUR (not displayed) 00:00:00:00
--:--:--:--
)
START TC
STOP TC
(DUR 00:00:00:00
00:00:02:00
0:02:00
)
START TC
STOP TC
(DUR 00:00:00:00
00:00:01:00
0:01:00
)
START TC
STOP TC
(DUR --:--:--:--
--:--:--:--
0:02:00
)
START TC
STOP TC
(DUR 00:59:58:00
01:00:00:00
0:02:00
)