Sony Multi Interface Shoe Adapter - Manual (Page 953)

953
Settings for Switcher Configuration (Config Menu)
Cha
p
te
r 20
Swi
tc
h
e
r S
e
tup (Swit
c
her
)
1
In the Switcher >Config menu, press [M/E Output Assign].
The M/E Output Assign menu appears.
2
On the list in the status area, select the bank output to be assigned.
The selected output appears in reverse video.
3
In the group, select the output signal to be assigned.
Setting the output configuration for each bank
When you selected [Multi Program] as the operation mode, use the following
procedure.
1
In the Switcher >Config menu, press [PGM Config].
The PGM Config menu appears.
The status area shows the background and key configuration assigned to
the output of each bank.
2
Using either of the following methods, select the output for which you
want to make the setting.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
The selected output appears in reverse video.
3
In the group, select the background.
4
Select [Clean] or [Utility].
5
In each of the to groups, select [Enable] or [Disable].
Setting the key preview configuration
You can make this setting at any time, regardless of the operation mode.
1
In the Switcher >Config menu, press [K-PVW Config].
The K-PVW Config menu appears.
The status area shows the key preview configuration for each bank.
Knob Parameter Adjustment Setting values
1 No (PGM) Output to which setting applies 1 to 16