Sphere settings, Explosion settings – Sony Multi Interface Shoe Adapter User Manual
Page 525

525
DME Special Effect Operations
Chapt
Sphere settings
You can set the degree of winding onto the sphere, the radius, the horizontal
position of the wound image, and front and back side output for the image.
Note
You cannot monitor the part of a rotating sphere that corresponds to its axis on
the monitor screen.
To apply the Sphere effect
Display the Sphere menu.
The knobs in the Sphere menu have the same functions as those in the Cylinder
menu.
For details about operation, see “Cylinder settings” (page 524).
Explosion settings
You can set the pattern shape and aspect ratio, the center position, the amount
of movement by fragments, the curvature of the transition path, and other
parameters.
To apply the Explosion effect
With the Explosion menu displayed, use the following procedure.
1
In the
• Circle
• Rectangle
• Star
• Heart
• Ellipse
2
Set the following parameters.
• When Circle was selected in step
1
• When Rectangle, Star, Heart, or Ellipse was selected in step
1
Knob
Parameter
Adjustment
Setting values
1
Transition
Degree of transition
0.00 to 100.00
2
Curve
Degree to which image periphery
expands
0.00 to 100.00
3
Spiral
Degree of curvature of transition
path
–100.00 to +100.00
Knob
Parameter
Adjustment
Setting values
1
Transition
Degree of transition
0.00 to 100.00