Switching the input reference signal for hd system – Sony Multi Interface Shoe Adapter User Manual
Page 845

845
Setting the Signal Format (Format Menu)
Chapt
For the method of inputting an install key, see “Making Settings Required to
Use the Software” (page 858).
1
In the System >Format menu, select the device for operations.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
2
Press [Signal Format].
A pop-up window appears.
3
Press the button for the desired signal format.
Switching the Input Reference Signal for HD System
This changes the input reference signal.
•
Tri Sync:
tri-level sync for an HD system
•
BB (Black Burst):
black burst or sync for an SD system
The following table shows the relation between signal format and the
frequency of a signal that can be used as the input reference signal.
Knob
Parameter
Adjustment
Setting values
1
Device
Selection of device for operations
1 and upwards
Signal format
Input reference signal
Tri Sync
Black burst
1080i/59.94
59.94
Black Burst 59.94
Sync 59.94
1080i/50
50
Black Burst 50
Sync 50
720P/59.94
59.94
Black Burst 59.94
Sync 59.94
720P/50
–
Black Burst 50
Sync 50