Making detailed settings for a vtr – Sony Multi Interface Shoe Adapter User Manual
Page 1021
1021
Serial Port Settings (Serial Port Assign Menu)
Chapt
To return the device name for the selected ID to the default name
In the
7
Using any of the following methods, specify the command to which the
response speed setting applies.
• Press directly on the delay list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
8
Turn the knob to set the response speed (in field units) of the device.
9
Press [Delay Set].
This confirms the setting.
10
Repeat steps
4
to
9
as required to make the settings for other commands.
Making detailed settings for a VTR
1
In the
the target for the setting (DCU1 or DCU2).
2
Using any of the following methods, select the serial port connected to the
VTR for which you want to make the settings.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
a) The range of setting values depends on the DCU port setting. (When the MKS-2700 is
connected, select 2 for the slot and a value in the range 1 to 6 for the port.)
3
Press [Port Setting].
The DCU >Serial Port Assign >VTR Setting menu appears.
Knob
Parameter
Adjustment
Setting values
2
No
Command number selection
1 to 18
Knob
Parameter
Adjustment
Setting values
3
Delay
Response speed setting
0 to 60
Knob Parameter
Adjustment
Setting
values
1
Port No
Serial port
1 and upwards
a)