Setting the dme wipe position (positioner), Setting the dme wipe pattern size (size) – Sony Multi Interface Shoe Adapter User Manual
Page 253
253
DME Wipe Settings for Independent Key Transitions
Chap
•
Slide/Squeeze:
slide and squeeze
•
Door:
door
•
Frame I/O:
frame in-out
•
2D Trans/3D Trans:
2D trans and 3D trans
•
User Program:
user programmable DME
For details of DME wipe patterns, see “Types of DME Wipe Pattern”
(page 232) and “DME Wipe Pattern List” (page 373).
The patterns from the selected pattern group appear on the screen.
3
Press the button to select the desired pattern.
Setting Independent Key Transition DME Wipe
Modifiers
You can add modifiers such as pattern position and size for an independent key
transition DME wipe.
For introductory information, see “Setting the DME wipe position
(Positioner)” (page 245) and “Setting the DME wipe pattern size (Size)” (page
247).
Setting the DME wipe position (Positioner)
For applicable pattern numbers,
.
1
In the
[Position], turning it on.
2
Set the following parameters.
To return the DME wipe pattern position to the center of the screen
In the
Setting the DME wipe pattern size (Size)
For applicable pattern numbers,
.
1
In the Key 1 DME Wipe Adjust menu, press [Size], turning it on.
Knob
Parameter
Adjustment
Setting values
1
H
Horizontal position
–200.00 to +200.00
2
V
Vertical position
–200.00 to +200.00