Sony Multi Interface Shoe Adapter - Manual (Page 896)

Ch
apt
er 19
C
o
nt
rol P
ane
l
S
e
tup (P
an
el)
896
Overall Control Panel Settings (Config Menu)
Here, press on the intersection of the “2nd Row” column and “Module
Assign” row.
3
In the group, select the key you want to assign.
In this example, select [Key3,4].
To return the key assignment to the default
In the Compact Key Module Assign menu, press [Default].
This returns all key assignments to their factory default state.
Assigning Preview Output to Preview Selection Buttons
It is possible to assign any preview output to a preview selection button.
This applies to the preview selection buttons in the fade-to-black control block
and the downstream key/fade-to-black control block.
Note
This operation cannot be done in the CCP-9000/9000A.
1
In the Panel >Config menu, press [Link/Program Button].
The Link/Program Button menu appears.
2
Press [Fade To Black Module].
The Fade To Black Module menu appears.
On the left of the status area, preview selection buttons (1 to 11) appear.
On the right side a list of signals to be assigned appears.
3
In the button indications on the left, press the button for the assignment.
4
Using any of the following methods, select the signal to be assigned.
• Press directly on the list on the right.
• In the list on the right, press the arrow keys to scroll the reverse video
cursor.
• Turn the knob.
5
Press [Set].
This assigns the signal selected in the list to the button.
Knob Parameter Adjustment Setting values
1 Button Button selection 1 to 20