Sony Multi Interface Shoe Adapter - Manual (Page 802)

Chapt
er
1
7
F
iles
802
Copying Files Between Different Unit IDs
Copying Files Between Different Unit IDs
Switcher and DME files on the hard disk or a memory card are handled
separately for each unit ID.
With the normal file copy operation, it is not possible to copy files between
different unit IDs. To copy files between different unit IDs, use the following
procedure.
For details of unit IDs, see “Setup for the Whole System” in Chapter 18
(Volume 3).
Displaying the Unit ID Copy menu
In the File menu, select VF7 ‘Configure’ and HF2 ‘Unit ID Copy.’
The Unit ID Copy menu appears.
Copying files between different unit IDs
To copy files between different unit IDs, grouped by category, use the
following procedure.
1
In the Unit ID Copy menu, press the category selection section at the top
right of the screen.
2
Press the categories you do not want to select, turning them off.
3
Press [OK].
4
In the operating device selection section on the left list, select the storage
location of the source files, and in the operating device selection section on
the right list, specify the destination storage location (
see “Selecting a
Device for Operations” (page 785) ).
5
Using either of the following methods, select the copy source and copy
destination unit IDs.
• Press directly on the list for the copy source on the left of the status area,
and on the right for the copy destination.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knobs.
Knob Parameter Adjustment Setting values
1 List L Selection of copy source unit ID 1 to 4
2 List R Selection of copy desitination unit ID 1 to 4