Sony Multi Interface Shoe Adapter - Manual (Page 496)

Cha
p
te
r 11
DME
O
per
at
ion
s
496
DME Special Effect Operations
Inverting the highlight areas
Press [Glow Invert], turning it on.
The highlight and non-highlight areas are inverted.
Masking the Glow effect with a selected pattern
Press [Mask] to display the Mask menu and set the type of pattern and
modifiers.
For details, see “Mask Settings” (page 496).
Mask Settings
The mask function is applied in units made up of the groups.
Applying masks
1
In the DME menu, select VF2 ‘Video Modify’ and HF7 ‘Mask.’
The Mask menu appears.
2
In the group, press the button for the group of the effect to which
you want to apply the mask, turning it on.
Effect Gp 1: Posterization, Solarization, Nega, Sepia, Mono, Contrast,
Mosaic, Sketch, Metal
Effect Gp 2: Defocus, Blur, Glow
Note
On the MVE-8000A and MKS-6470, Effect Gp 1 and Effect Gp 2 cannot
be turned on at the same time.
3
Press [Position/Size].
4
Set the mask source parameters.
The valid ranges of the parameter values depend on the combination of
signal format (SD/HD) and aspect ratio (4:3/16:9) selected in the system,
as follows.
• 4:3 mode
Knob Parameter Adjustment Setting values
1 H Horizontal position –8.00 to +8.00 (SD)
–24.00 to +24.00 (HD)