Sony Multi Interface Shoe Adapter - Manual (Page 474)

Cha
p
te
r 11
DME
O
per
at
ion
s
474
DME Special Effect Operations
4
To change the shadow color, press [Drop Shdw Color], then adjust the
following parameters.
5
To soften the edges, turn [Shadow Soft] on.
Wipe Crop Settings
Notes
• The wipe crop function is not supported on the MVE-8000A and MKS-6470.
• When wipe crop is on, any mask that was on is turned off.
• When brick is on, wipe crop cannot be turned on. To turn wipe crop on, it is
first necessary to turn brick off.
• In the group of the Video/Key menu, when [Output] is off,
unless you set [Bkgd] in the HF1 ‘Bkgd’ menu to on, the wipe crop effect
will not function.
Applying the wipe crop effect
To select the pattern
1
In the DME menu, select VF1 ‘Edge’ and HF6 ‘Wipe Crop.’
The Wipe Crop menu appears.
2
Press [Wipe Crop], turning it on.
3
Press [Pattern Select].
The Pattern Select menu appears.
4
From the displayed patterns (standard wipe patterns 1 to 24 and 304), press
any pattern to select it.
In this state, you can use the knobs to adjust the size of the pattern. (For
details of parameters, see the next item.)
Knob Parameter Adjustment Setting values
1 Luminance Luminance 0.00 to 100.00
2 Saturation Saturation 0.00 to 100.00
3 Hue Hue 359.99 to 0.00