Sony Multi Interface Shoe Adapter - Manual (Page 524)

Cha
p
te
r 11
DME
O
per
at
ion
s
524
DME Special Effect Operations
• When Flat is selected
• When Hue Rotation is selected
Roll settings
There are four modes: H&V, H, V, and Off. You can select the turn position,
the radius of the turned portion, the amount and angle of turning, and the input
video for the front and back pages.
To apply the Roll effect
Display the Roll menu.
The knobs in the Roll menu have the same functions as those in the Page Turn
menu.
For details about operation, see “Page Turn settings” (page 523).
Cylinder settings
You can set the degree of winding onto the cylinder, the radius, the horizontal
position of the wound image, and front and back side output for the image.
To apply the Cylinder effect
With the Cylinder menu displayed, set the following parameters.
The procedure for selecting the input signal in the group is the
same as for the Page Turn menu.
For details about operation, see “Page Turn settings” (page 523).
Knob Parameter Adjustment Setting values
1 Luminance Luminance 0.00 to 100.00
2 Saturation Saturation 0.00 to 100.00
3 Hue Hue 359.99 to 0.00
Knob Parameter Adjustment Setting values
1 Luminance Luminance 0.00 to 100.00
2 Saturation Saturation 0.00 to 100.00
3 Speed Speed at which hue changes –12.00 to +12.00
Knob Parameter Adjustment Setting values
1 Radius Degree to which image is wound onto
the cylinder 0.00 to 100.00
2 Min R Radius of the cylinder 0.00 to 100.00
3 Offset Horizontal position of the image
wound onto cylinder –100.00 to +100.00