Sony Multi Interface Shoe Adapter User Manual
Page 51
51
Names and Functions of Parts of the Control Panel
Chap
i
PRIOR (priority) SET button
While this button is held down, you can set
the key priority.
The setting mode when this button is
pressed depends on whether or not the
[KEY PRIOR] button is lit, as follows.
• When the [KEY PRIOR] button is off, the
current key priority is set.
• When the [KEY PRIOR] button is lit, the
key priority after the next transition is set.
Press the [KEY PRIOR] button as required,
to switch between these two modes.
In either mode, hold down the [PRIOR
SET] button, and press the button ([KEY1]
to [KEY4]) corresponding to the key you
want to bring to the front.
The following controls are used as the
independent key transition control block.
j
Independent key/downstream key
transition execution section
KEY1 TRANS to KEY4 TRANS (DSK1
TRANS to DSK4 TRANS in the
PGM/PST bank) buttons:
These
correspond to keys 1 to 4 from top to
bottom; press one to carry out an auto
transition. The transition rate for an
independent key transition can be set in
the numeric keypad control block or in
a menu.
The color with which buttons are lit shows
the status, as follows.
Lit green:
During a transition
Lit amber:
Key on. Not inserted into
program video (final output video from
the switcher).
Lit red:
Key on. Inserted into program
video (final output video from the
switcher).
Not lit:
Key off.