Sony Multi Interface Shoe Adapter - Manual (Page 540)

Cha
p
te
r 11
DME
O
per
at
ion
s
540
DME Special Effect Operations
This enables motion decay, and you can now use the knobs to adjust the
parameters.
3
Set the following parameter.
a) At the setting 0.00, there is no afterimage. At a setting of 100.00, the afterimage does not
decay.
4
In the group, select the way in which the video signal
is blurred.
Soft: mix the live image and the afterimage.
Hard: show the lighter of the live image and afterimage.
5
To erase the afterimage, press [Decay Eraser], turning it on.
Erasing the afterimages that remain in memory whenever a
keyframe is passed
Press [Decay Eraser], turning it on.
When the effect passes a keyframe, the afterimage is erased before writing a
new afterimage.
Selecting the freeze timing
In the group, select the timing for motion decay
freezing.
Frame: freeze in frame units.
Field: freeze in field units.
Note
The freeze timing setting is not required when the following signal formats are
being used.
Signal formats: 720P/59.94, 720P/50
Applying stardust to the afterimage portion
The afterimage portion becomes stardust, and gradually disappears.
1
Press the [DUST] button, turning it on.
2
Set the following parameters.
Knob Parameter Adjustment Setting values
1 Video Decay Degree of blurring of the video
signal
0.00 to 100.00
a)