Sony Multi Interface Shoe Adapter User Manual
Page 608
608
Control of VTRs, Extended VTRs, and Disk Recorders
Ch
apt
• When using a disk recorder with the VTR/disk recorder timeline, if you carry
out the following sequence of operations, the system may freeze on the frame
of the start point.
1. Press the [RUN] button to play to a point close to the end of a file.
2. Stop playback.
3. Press the [RUN] button once more.
In such cases, first recall a different register, then carry out the following
sequence:
1. Recall the original register again.
2. Press the [REWIND] button.
3. Press the [RUN] button.
• Some operating limitations apply when the video disk communications
protocol is used. These are explained with reference to the following figure,
which illustrates creation of a timeline that plays from the video of file A to
the video of file B.
– Operation with no problems:
– Black video or still image appears momentarily when play switches from
file A to file B:
KF1 action setting
Operating status of file
A
KF2 action setting
Start
Playing
Start
KF1 action setting
Operating status of file
A
KF2 action setting
Start
Playing
Cueup
Variable Speed set
Playing at variable speed
Cueup
Cueup
Cueup
Cueup
KF1
KF2
a)
KF3
Playback
Playback at set variable speed
a) In keyframe 2, set variable speed only, and do not set the start point.
KF1
KF2
A
B