Sony Multi Interface Shoe Adapter User Manual
Page 737
737
Macro Operations in the Numeric Keypad Control Block and the Keyframe Control Block
Chap
The numeric display in the numeric keypad control block shows the
current event number and the indication “TO.”
3
To set the start of the range to other than the current event number, press
the [CLR/AUTO TRANS] button in the numeric keypad control block,
then enter the desired event number with the numeric keypad and press the
[ENTER] button. (This operation is not required when using the current
event number.)
4
Enter the event number for the end of the range and press the [ENTER]
button.
5
Press the [MOD] button in the keyframe control block.
This modifies the specified range of events simultaneously.
Deleting an event
1
Specify the edit point.
(See
)
2
To delete multiple events simultaneously, press the [FROM TO] button in
the keyframe control block, then enter the event numbers from the numeric
keypad control block to specify a range to be deleted.
3
Press the [DEL] button.
This deletes the specified events.
Moving events
1
Specify the edit point for the start of the range to be moved.
(See
.
)
2
To move multiple events simultaneously, press the [FROM TO] button in
the keyframe control block, then specify the range in the numeric keypad
control block.
3
Press the [DEL] button.
This temporarily deletes the specified events from the macro, and copies
them to the paste buffer.
4
Move to the edit point which is the destination within the macro to which
you want to move the events.
5
To paste the contents of the paste buffer after the edit point, press the
[PASTE] button in the keyframe control block.