Combiner settings – Sony Multi Interface Shoe Adapter User Manual
Page 573

573
Global Effect Operations
Chapt
Combiner Settings
When multiple channels are selected on one keyer or for one transition, the
Combiner automatically combines the selected images. Up to two channels can
be combined.
You can also control the way in which the combination is carried out, as a mix
or an overlap with priority set automatically. For a mix, you can control the
relative amounts of each channel.
Note
When the Combiner is enabled on the MKS-6470, selecting Int Key as the key
source of channel 2 prevents the effect of independent key transition to be
applied to the channel. To apply the effect, select Ext Key as the key source of
channel 2. For details of the key source,
see
Combination of channel 1 (Ch1) and channel 2 (Ch2)
Mixing Ch1 and Ch2
If the Mix1 setting is 70, the proportion of the channels in the mixed portion in
the previous illustration is as shown in the following table.
Combination
Indication in figure
Ch1
Ch2
Ch1 and Ch2
30%
70%
Ch1
Ch2
Ch1
1
2
1
2
Combiner
Ch1
Ch2
1
2
Mix1
Ch1
Ch2