beautypg.com

Selecting a vtr/extended vtr/disk recorder, Controlling the tape/disk transport – Sony Multi Interface Shoe Adapter User Manual

Page 593

background image

593

Control of VTRs, Extended VTRs, and Disk Recorders

Chap

te

r 1
2

Ex
te

rnal

De
v

ic

e

s

When the [MENU] button is On:

stop point of the timeline

When the [MENU] button is Off:

stop point of Cueup & Play

VAR (variable speed playback):

Pressing this button and turning the Z-ring

plays back the tape, disk or frame memory clip at a variable speed and
direction proportional to the rotation angle of the Z-ring. The variable
speed range is –1 to +3 times normal playback speed.

SHTL (shuttle):

Pressing this button and turning the Z-ring plays back the

tape, disk or frame memory clip at a speed and direction proportional to the
rotation angle of the Z-ring.

JOG:

Pressing this button and turning the Z-ring plays back the tape, disk or

frame memory clip at a speed and direction proportional to the rotation of
the Z-ring.

CUE:

Pressing this button cues the tape, disk or frame memory clip

automatically to the start point.

REW (rewind):

Press this button to rewind the tape, disk or frame memory

clip.

PLAY:

Press this button to play the tape, disk or frame memory clip.

FF:

Press this button to fast forward the tape, disk or frame memory clip.

ALL STOP:

Press this button to stop all tape transport/disk drive/frame

memory operations.

Selecting a VTR/Extended VTR/disk recorder

To select the VTR/Extended VTR/disk recorder to be controlled, in the device
selection buttons of the device control block, press a selection of those buttons
turning them on.

For details on frame memory clip operations, see “Frame Memory Clip
Operations” in Chapter 7 (Volume 1).

Controlling the tape/disk transport

Using the buttons in the device control block, you can control the tape transport
or the disk transport.

For more details of the effect of buttons in VTR/disk recorder operation mode,
see “Device Control Block (MKS-8031TB Trackball Module, Option)” and
“Device Control Block (MKS-8036A Search Dial Module, Option)” in
Chapter 2 “Menus and Control Panel” (Volume 1).

If an appropriate setup setting has been made, VTR, Extended VTR, or disk
recorder can also be operated with the transition control block.

For more details of the effect of buttons in VTR/disk recorder operation mode,
see “Transition Control Block” in Chapter 2 “Menus and Control Panel”
(Volume 1).