Sony Multi Interface Shoe Adapter - Manual (Page 184)

184
Key Setting Operations With the Cross-Point Control Block
Chap
te
r
4
K
e
y
s
Ending a DME assignment
To end the assignment of a DME to key 1, in the cross-point control block, hold
down the key row delegation button [KEY1] and press the DME button
([DME1] and [DME2]) that is lit green.
The button goes off, and this ends the assignment.
Selecting the video signal for a DME assigned to a key
1
In the cross-point control block, press the key row delegation button
[KEY1].
The assigned DME button lights amber.
2
Press the DME button (one of [DME1] and [DME2]) lit amber, which then
lights green.
3
To select the video signal for the side of the DME image that is currently
visible, make the signal selection in the key row.
4
To select the video signal for the side of the DME image that is currently
not visible (the back side), hold down the DME button (one of [DME1] or
[DME2]) and make the signal selection in the key row.
When two or more DME channels are assigned, select the video signal for each
DME in the same way.