Sony Multi Interface Shoe Adapter - Manual (Page 1009)

1009
GPI Input Setting (GPI Input Assign Menu)
Chapt
er
22
DCU
Se
tu
p (DCU)
GPI Input Setting (GPI Input Assign Menu)
To set the trigger type and so on for each GPI input, display the DCU >GPI
Input Assign menu.
To display the GPI Input Assign menu
In the Engineering Setup menu, select VF5 ‘DCU’ and HF2 ‘GPI Input
Assign.’
The GPI input port setting status appears in the status area.
Making DCU GPI Input Settings
1
In the DCU >GPI Input Assign menu, using any of the following methods
select what the setting applies to.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
2
In the group, select the trigger polarity.
(Rising Edge): Apply the trigger on a rising edge of an input pulse.
(Falling Edge): Apply the trigger on a falling edge of an input
pulse.
(Any Edge): Apply the trigger on a change in the polarity of the
input signal.
(Level): Carry out the specified operation when the input is low or
high.
No Operation: Apply no trigger on an input pulse.
3
In the group, select the control panel to handle the GPI
input.
SCU1: ID1 control panel (PNL1)
SCU2: ID2 control panel (PNL2)
SCU3: ID3 control panel (PNL3)
Knob Parameter Adjustment Setting values
1 No GPI input 1 to 50