Sony Multi Interface Shoe Adapter - Manual (Page 114)

114
Transitions
Chapt
er
3
S
ign
al Sele
c
tio
n
a
nd T
ran
s
itio
n
s
Note
This transition type is not available for an independent key transition.
Super mix
In this dissolve, the current video is maintained at 100% output for the first half
of the transition as the new video is mixed while increasing progressively to
100%, then the current video is progressively reduced from 100% to zero in the
second half with the new video maintained at 100% output.
For details on super mix settings, see page 125.
Note
This transition type is not available for an independent key transition.
Preset color mix
This is a two-stage dissolve, comprising two transitions, the first a dissolve to
a color matte, and the second from the color matte to the new video.
In the first transition, the current video is replaced by the color matte in a mix
(dissolve), then in the second transition the color matte is replaced by the new
video also in a mix (dissolve).
For details on color matte settings, see page 126.
Note
This transition type is not available for an independent key transition.
Wipe
A wipe replaces the current video by the new video according to a
predetermined pattern. This transition type can also be selected for an
independent key transition.
For details, see “Wipes” (page 33) and Chapter 5 “Wipes” (page 209).
DME wipe
Using a DME effect, it is possible to obtain a transition to a new image from
the current image, as in a wipe. You can also use this transition type as an
independent key transition.
For details, see “DME Wipes” (page 33) and Chapter 6 “DME Wipes” (page
231).