Sony Multi Interface Shoe Adapter - Manual (Page 497)

497
DME Special Effect Operations
Chapt
er
11
DME Ope
ra
tions
a) This setting value is not supported on the MVE-8000A and MKS-6470.
• 16:9 mode
a) This setting value is not supported on the MVE-8000A and MKS-6470.
5
To invert the mask source, press [Invert], turning it on.
6
As required, set the modifiers for the mask pattern.
• When turning [Aspect] on and adjusting the pattern aspect ratio
a) When a minus value is specified, the picture is extended in the vertical direction. When a
plus value is specified, the picture is extended in the horizontal direction.
• When turning [Angle] on in the group and slanting the
pattern
a) –1.00 is one rotation in counterclockwise direction. +1.00 is one rotation in clockwise
direction. 0.00 is no rotation.
• When turning [Speed] on in the group and rotating the
pattern at a specified speed
2 V Vertical position –6.00 to +6.00 (SD)
–18.00 to +18.00 (HD)
3 Size Size of mask 0.00 to 100.00
4 Soft Softness of mask 0.00 to 100.00
5 Pattern Pattern number
21, 24, 304
a)
Knob Parameter Adjustment Setting values
Knob Parameter Adjustment Setting values
1 H Horizontal position –8.00 to +8.00 (SD)
–32.00 to +32.00 (HD)
2 V Vertical position –4.50 to +4.50 (SD)
–18.00 to +18.00 (HD)
3 Size Size of mask 0.00 to 100.00
4 Soft Softness of mask 0.00 to 100.00
5 Pattern Pattern number
21, 24, 304
a)
Knob Parameter Adjustment Setting values
1 Aspect Aspect ratio
–100.00 to +100.00
a)
Knob Parameter Adjustment Setting values
1 Angle Rotation angle of pattern
–8.00 to +8.00
a)
Knob Parameter Adjustment Setting values
1 Speed Rotation speed of pattern
–100.00 to +100.00
a)