Sony Multi Interface Shoe Adapter - Manual (Page 457)

457
DME Special Effect Operations
Chapt
er
11
DME Ope
ra
tions
Key Border Settings
Note
The Key Border function is not supported on the MVE-8000A and MKS-6470.
Applying key borders
1
In the DME menu, select VF1 ‘Edge’ and HF3 ‘Key Border.’
The Key Border menu appears.
2
Press [Key Border], turning it on.
This enables key borders, and you can now use the knobs to adjust the
parameters.
Note
The key border function and Glow function (see page 495) cannot be
turned on at the same time. Only the one most recently turned on is
effective.
3
Set the following parameters.
4
To set the key border color, press [Flat Color] and adjust the following
parameters.
To select an outline only key
Press [Outline], turning it on.
Knob Parameter Adjustment Setting values
1 H Simultaneously adjust width of left
and right key borders 0.00 to 100.00
2 V Simultaneously adjust width of top
and bottom key borders 0.00 to 100.00
3 All Simultaneously adjust width of all
four key borders Value of H shown
4 Soft Softness of the key borders 0.00 to 100.00
5 Density Density of the key borders 0.00 to 100.00
Knob Parameter Adjustment Setting values
1 Luminance Luminance 0.00 to 100.00
2 Saturation Saturation 0.00 to 100.00
3 Hue Hue 359.99 to 0.00