Error messages shown in the error information menu – Sony Multi Interface Shoe Adapter User Manual
Page 1082
App
1082
Error Messages
a) MKS-8010A only
Error Messages Shown in the Error Information Menu
If a file transfer related error occurs, the Error Information menu appears to the
following error messages.
Warning
This operation will be
cancelled, because the register
is locked.
Please change the register
status to be unlocked first.
6211.1: Effect >Master Timeline >Store >Edit
6311.1: Snapshot >Master Snapshot >Store
>Edit
6411.1: Shotbox >Register >Store>Edit
In the above menus, an attempt was made to
store in a locked register. Unlock the register
before carrying out the store.
Warning
(System
Config)
Illegal Network Config
Information (Page 7311)
When starting up the menu system, if the
system information read from the control panel
is not correct, one of these messages, that
corresponds to the situation appears.
Following the message, use 7311:Engineering
Setup >System >Network Config or
7312:Engineering Setup >System >System
Config to retry the operation.
Illegal Panel Assign
Information for Dual Simul
Operation (Page 7312)
No Panel Assign Information
(Page 7312)
No Switcher Assign
Information (Page 7312)
No System Operation Mode
Information (Page 7312)
No DME Channel Information
Icon Title
Message
Description
Error message
Error description/measures
[Error] Packet Format
Load/save the data again. Still then the message is displayed,
contact a Sony service representative.
[Error] No Request
[Error] No Request File
[Error] Illegal Host
[Error] Not Supported
[Error] USB Access
[Error] Get File System Info
[Error] Copy Result
[Error] Remove Result
[Error] Move Result
[Error] Make Dir Result
[Error] Path Info
[Error] Dir Operation
[Error] Command Result