Sony Multi Interface Shoe Adapter - Manual (Page 759)

759
Macro Attachment Assigning
Chap
te
r 1
6
Mac
ros
• Reg: Shows the names of assigned registers.
• Name: Shows the names of macro registers.
• Mode: Shows the names of macro modes (Pre/Post/Only/---
1)
).
Above the list is shown the names of the block and macro attachment assigned
button currently selected in the list.
1) When no macro mode is set
For details of the macro modes, see “Setting a macro attachment to a button”
(page 753).
For details of the macro attachment list display, see “About the Macro
Attachment List Display” in the Appendix (page 826).
Moving quickly within the macro attachment list from one block
to another
When you are viewing the macro attachment settings for a block in the macro
attachment list, you can move quickly from the current block to another block
to check the settings for that block by pressing the following buttons in the
group.
•
P/P : Move to a block in the PGM/PST bank.
• M/E-1: Move to a block in the M/E-1 bank.
• M/E-2: Move to a block in the M/E-2 bank.
• M/E-3: Move to a block in the M/E-3 bank.
• Aux: Move to a section in the auxiliary bus control block.
• Others: Move to a block/section in a location other than the PGM/PST bank,
M/E-1 to M/E-3 banks, and the auxiliary bus control block.
Scrolling the list
To scroll the macro attachment list, do one of the following.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob Parameter Adjustment Setting values
1 No Macro attachment settings scrolling 1 and upwards