Sony Multi Interface Shoe Adapter - Manual (Page 456)

Cha
p
te
r 11
DME
O
per
at
ion
s
456
DME Special Effect Operations
Color: colored edges. When this is selected, set the following parameters
in the group.
• To set the density
• To set the colors for each edge (Top, Left, Right, Bottom, All)
a) For the All adjustment, the value for Left is shown.
5
To soften the inside of the edges and the boundaries between adjacent
edges, turn on [Edge Soft], and adjust the following parameters.
Knob Parameter Adjustment Setting values
1 Top Adjust luminance of top edge –100.00 to +100.00
2 Left Adjust luminance of left edge –100.00 to +100.00
3 Right Adjust luminance of right edge –100.00 to +100.00
4 Bottom Adjust luminance of bottom edge –100.00 to +100.00
5 All Simultaneously adjust luminance of
all four edges Value of Left shown
Knob Parameter Adjustment Setting values
1 Density Adjust the color density 0.00 to 100.00
Knob Parameter Adjustment Setting values
1 Luminance Luminance
0.00 to 100.00
a)
2 Saturation Saturation
0.00 to 100.00
a)
3 Hue Hue
359.99 to 0.00
a)
Knob Parameter Adjustment Setting values
1 Inner Soft Softness of the inside of edges 0.00 to 100.00
2 Bound Soft Softness of the edge boundaries 0.00 to 100.00
Bound Soft
Inner Soft