Displaying a list of effect registers for editing – Sony Multi Interface Shoe Adapter User Manual

Page 684

Chapt

684

CON, PRN, AUX, CLOCK$, NUL, COM0, COM1, COM2, COM3,
COM4, COM5, COM6, COM7, COM8, COM9
LPT0, LPT1, LPT2, LPT3, LPT4, LPT5, LPT6, LPT7, LPT8, LPT9

Displaying a List of Effect Registers for Editing

You can display a list of effect registers including status information (whether
data is present and so on), then carry out lock, copy, delete, and rename
operations.

Displaying the list of effect registers with status information

Press the menu title button at the top left of the Effect menu.
The Effect >Status menu appears. The status area shows a list of effect registers
(1 to 99).

Register name displays

For the same number, the register name for the M/E-1 region takes precedence.
If there is no data for the M/E-1 region, then the register name appears in the
sequence P/P >User1 to User8 >DME ch1 >DME ch2 >Device1 to Device12
>P-Bus >GPI >Macro.

Indication colors

Each register has a color-coded border, indicating its status.

Selected register:

pale blue border

Register containing data:

shown amber within the border. If, however, there

are one or more locked regions, the display is in red.

Write-protecting the contents of the register (lock function)

(This applies to all regions.)

In the Effect >Status menu, use the following procedure.

Using any of the following methods, select the register you want to lock.

• Press directly on the corresponding register indication in the status area.
• Turn the knob.

Knob

Parameter

Adjustment

Setting values

1 to 99