Sony Multi Interface Shoe Adapter - Manual (Page 493)

493
DME Special Effect Operations
Chapt
er
11
DME Ope
ra
tions
Metal Settings
Applying the Metal effect
1
In the DME menu, select VF7 ‘Enhanced Video Modify’ and HF2 ‘Metal.’
The Metal menu appears.
2
Press [Metal], turning it on.
This enables the Metal effect.
3
Set the parameters.
4
In the group, select the type of metallic gloss.
Gold: Give a gold gloss to the input video.
Silver: Give a silver gloss to the input video.
Rainbow: Give a rainbow color gloss to the input video.
Variable: Give a metallic gloss to the input video in any color by adjusting
the following parameters.
Masking the Metal effect with a selected pattern
Press [Mask] to display the Mask menu and set the type of pattern and
modifiers.
For details, see “Mask Settings” (page 496).
Knob Parameter Adjustment Setting values
1 Mix Ratio Mix amount for Metal video and
input video 0.00 to 100.00
2 Y Clip Clip level of input signal Y level 0.00 to 100.00
3 Y Gain Amount of gain for clip adjusted
input signal Y level –100.00 to +100.00
4 Y Offset Offset added to clip and gain
adjusted input Y signal 0.00 to 100.00
Knob Parameter Adjustment Setting values
2 Saturation Saturation 0.00 to 100.00
3 Hue Hue 359.99 to 0.00