Making dme gpi output settings, Making dme gpi output settings 4 – Sony Multi Interface Shoe Adapter User Manual
Page 1004

C
hap
1004
Interfacing With External Devices (Device Interface Menu)
3
To apply the selection made in step
2
when the input is high, press [H Set].
To apply the selection made in step
2
when the input is low, press [L Set].
This confirms the setting, which appears in the status area.
Making DME GPI Output Settings
Note
DME1 does not have a GPI output.
1
In the DME >Device Interface menu, press [DME2 GPI Output].
The DME2 GPI Output menu appears.
The output port selection is fixed at 1.
2
In the
Status:
Depending on the status, the relay contacts are closed or opened,
or the output is switched between high and low.
No Operation:
The trigger has no effect on the relay state or output level.
3
Using any of the following methods, select the action you want to set.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
a) Error Make, Error Break, No Action
4
Press [Action Set] to confirm the action selection.
The selected setting appears in the status area.
Knob
Parameter
Adjustment
Setting values
2
Action
Action selection
1 to 3
a)