Sony Multi Interface Shoe Adapter - Manual (Page 530)

Cha
p
te
r 11
DME
O
per
at
ion
s
530
DME Special Effect Operations
Bar: Bar illumination. You can specify the width and angle of the bar, and its
softness.
Preset: Lighting pattern suitable for nonlinear effects.
When Bar is selected, the following modes can be selected.
Normal: Emphasizes the bar highlight area.
Specular: An effect like light striking a surface with metallic reflections.
Mat: An effect like light striking paper, cloth, or another diffusively reflective
surface.
Note
The function for setting the bar mode of the lighting area is not supported on
the MVE-8000A and MKS-6470.
Applying the Lighting effect
1
In the DME menu, select VF5 ‘Light/Trail’ and HF1 ‘Lighting.’
The Lighting menu appears.
2
Press [Lighting], turning it on.
The Lighting effect is enabled.
3
In the group, select the lighting pattern Plane, Bar or
Preset.
You can adjust the intensity of the light and other parameters with the
knobs.
Note
For MKS-6470, the pattern Preset is not supported.
4
Set the parameters.
The parameters differ as follows, depending on the selected lighting
pattern.
• When Plane is selected
a) You can make the Lighting effect more effective by adjusting [Total Ambient] to lower the
brightness of the entire image. This setting is used both by this effect and by the
Spotlighting effect.
Knob Parameter Adjustment Setting values
1 Light Intensity of light in highlight area 0.00 to 100.00
5 Total Ambient Brightness of whole image
0.00 to 100.00 a)