Effect status display, Effect register editing, Effect status display effect register editing – Sony Multi Interface Shoe Adapter User Manual
Page 679: Setting the duration for a temporary attribute

679
Register Operations in the Menus
Ch
• To select all registers, press [ALL].
5
Press [Effect Dissolve], turning it on.
6
Turn the knob to set the duration.
Setting the duration for a temporary attribute
To set the duration for a temporary attribute set in the numeric keypad control
block, turn knob 5.
Effect Status Display
The Effect >Effect 1-99 menu displays the following information.
Region name:
The selected region name appears in the upper part of the list.
Register number
Register name
Write-protected status:
When the register is write-protected, a letter “L”
appears.
Empty status:
When the register is empty, a letter “E” appears.
Effect Register Editing
You can carry out the following editing on effect registers and master timeline
registers.
•
Lock:
Write-protect the contents of the register.
•
Copy:
Copy the contents of one register to another register.
• Merge:
Merge the data of two registers. It is not possible to merge master
timeline registers.
Knob Parameter
Adjustment
Setting
values
1
Register
Register number
1 to 99
3
Num
Select number of registers
1 to 99
Knob
Parameter
Adjustment
Setting values
4
Eff Diss
Duration
Dissolve duration
1 to 999 (frames)
Knob Parameter
Adjustment
Setting
values
5
Temp Dur
Temporary attribute
dissolve duration
0 to 999 (frames)