Split settings, Split slide settings – Sony Multi Interface Shoe Adapter User Manual
Page 516

Cha
516
DME Special Effect Operations
Split settings
You can set the degree to which the image is split, the split positions, and other
parameters.
To apply the Split effect
With the Split menu displayed, use the following procedure.
1
In the
Single:
Leave gaps between splits.
Double:
Fill gaps between splits with the same image.
2
Set the following parameters.
To set the split position
1
Press [Position].
2
Set the following parameters.
a) Setting for SD 4:3, SD 16:9
b) Setting for HD 4:3, HD 16:9
Split Slide settings
You can set the degree of transition, the degree of randomness in the distance
moved by each block, the degree of sliding, block width, block angle, and other
parameters.
To apply the Split Slide effect
With the Split Slide menu displayed, set the following parameters.
Knob
Parameter
Adjustment
Setting values
1
Transition H
Degree of left and right separation
0.000 to 100.000
2
Transition V
Degree of top and bottom
separation
0.000 to 100.000
Knob
Parameter
Adjustment
Setting values
1
H
Degree of left and right
separation
–4.000 to +4.000
a)
–16.000 to +16.000
b)
2
V
Degree of top and bottom
separation
–3.000 to +3.000
a)
–12.000 to +12.000
b)