Sony Multi Interface Shoe Adapter - Manual (Page 1036)

Ch
apt
er 23
Set
up Rela
tin
g
to
Rou
te
r Int
e
rfac
e an
d T
a
lly
(Rou
te
r/T
a
lly
)
1036
Wiring Settings (Wiring Menu)
Source Level: Specify the source level for the wiring configuration.
4
Press [Execute].
This makes the wiring setting according to the specifications in steps 2 and
3 .
Changing the Wiring Settings
1
In the Router/Tally >Wiring menu, press [Modify].
The Modify menu appears.
2
Referring to steps 2 and 3 in the preceding section “Making new wiring
settings,” change the parameters as required. In this case, however, it is not
possible to specify multiple destinations in a single operation, and a single
“Destination Address” must be specified.
3
Press [Execute].
This updates the wiring settings.
Deleting Wiring Settings
1
In the Router/Tally >Wiring menu, using either of the following methods,
select the wiring whose settings you want to delete.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
2
Press [Delete].
This deletes the selected wiring entry.
Sorting Wiring Settings
In the Router/Tally >Wiring menu, press [Sort].
The sorting of wiring settings are executed in the following order.
Knob Parameter Adjustment Setting values
4 Source (From) Source start address 1 to 1024
5 Source (Level) Source level 1 to 8