Sony Multi Interface Shoe Adapter - Manual (Page 468)

Cha
p
te
r 11
DME
O
per
at
ion
s
468
DME Special Effect Operations
Adjusting the size of the flex shadow
1
In the Flex Drop Shadow menu, press [Size], turning it on.
2
Set the following parameters.
a) The Soft parameter is valid only when [Internal] is selected in the
group.
Setting the center point of the flex shadow
1
In the Flex Drop Shadow menu, press [Axis Loc], turning it on.
2
Adjust the following parameters.
The valid ranges of the parameter values depend on the combination of
signal format (SD/HD) and aspect ratio (4:3/16:9) selected in the system,
as follows.
• 4:3 mode
• 16:9 mode
Knob Parameter Adjustment Setting values
1 Size H Enlarge or shrink horizontally 0.00 to 2.00
2 Size V Enlarge or shrink vertically 0.00 to 2.00
3 Size All Enlarge or shrink horizontally and
vertically Value of Size H
shown
4
Soft
a) Softness of shadow 0.00 to 100.00
5 Density Density of shadow 0.00 to 100.00
Knob Parameter Adjustment Setting values
1 Axis Loc H Move the shadow center axis
horizontally –8.00 to +8.00 (SD)
–24.00 to +24.00 (HD)
2 Axis Loc V Move the shadow center axis
vertically –6.00 to +6.00 (SD)
–18.00 to +18.00 (HD)
Knob Parameter Adjustment Setting values
1 Axis Loc H Move the shadow center axis
horizontally –8.00 to +8.00 (SD)
–32.00 to +32.00 (HD)
2 Axis Loc V Move the shadow center axis
vertically –4.50 to +4.50 (SD)
–18.00 to +18.00 (HD)