Sony Multi Interface Shoe Adapter - Manual (Page 483)

483
DME Special Effect Operations
Chapt
er
11
DME Ope
ra
tions
Masking the Defocus effect with a selected pattern
Press [Mask] to display the Mask menu, and set the pattern type and modifiers.
For details, see “Mask Settings” (page 496).
Blur Settings
Applying the Blur effect
1
In the DME menu, select VF2 ‘Video Modify’ and HF1 ‘Defocus/Blur.’
The Defocus/Blur menu appears.
2
Press [Blur], turning it on.
The Blur effect is enabled. You can adjust the blurring of video and key
signals with the knobs.
Note
On the MVE-8000A and MKS-6470, the Glow and Blur effects cannot be
enabled at the same time. The effect which was turned on most recently is
enabled.
3
When the MVE-8000A/MVE-9000 is connected through an SDI interface,
in the group, select the signal to which you want apply the
Blur effect.
Video/Key: Video signal and key signal
Video: Video signal only
Key: Key signal only
4
Set the parameters.
• When MKS-6470 is used
• When Video/Key is selected (with SDI-interfaced MVE-8000A/
MVE-9000)
Knob Parameter Adjustment Setting values
1 H Horizontal defocusing of video
and key signals 0.00 to 100.00
2 V Vertical defocusing of video and
key signals 0.00 to 100.00
3 All Horizontal and vertical
defocusing of video and key
signals H value shown