Graphics display, Skew – Sony Multi Interface Shoe Adapter User Manual
Page 421
421
DME
Chapt
Skew
In the source coordinate space, change the skew of the image on the x-axis or
y-axis.
Graphics Display
Graphics display is a function that allows you to display wire frames,
coordinate axes and a grid over the current DME image, to make it easier to
create effects in three-dimensional coordinate space.
Graphics displayed by this function can also be output to the monitor output
connector.
Note
When using MKS-6470, these graphics are output to the monitor signal of the
switcher.
To make graphics display settings, use the DME menu. (
For details, see
“Graphics Display Operation” (page 432).)
You can display the following kinds of graphics.
Wire frames
A wire frame displays an image enclosed in a frames, so that you can check the
position and size of the image. If there is a shadow
a frame is
shown for the shadow as well.
Coordinate axes
This is a three-dimensional display of coordinates in local or global coordinate
space. You can check the origin of the axes and the directions of the x-, y-, and
z-axes.
Change of skew on x-axis
Change of skew on y-axis