Setting the combiners – Sony Multi Interface Shoe Adapter User Manual
Page 574

Cha
574
Global Effect Operations
Ch1 crossed with Ch2
Setting the combiners
Select how the images for channels 1 and 2 are combined.
1
In the Global Effect >Ch1-Ch2 menu, select HF1 ‘Combiner Priority.’
The Combiner Priority menu appears.
2
If either [Mix] or [Auto] is On, set them to Off.
3
In the
Alternatively, in the
underneath.
4
For a mix press [Mix], turning it to On.
5
Adjust the following parameter.
Automatically setting the priority of overlapping images
To set the system so that the priority of overlapping images is automatically
determined by their position on the z-axis, in the Combiner Priority menu,
press [Auto], turning it on.
Note
It is not possible to cross images. If an image is rotated, the priority is
determined by the position on the z-axis of the center of the image.
Ch1
Ch2
1
2
Depth
Knob
Parameter
Adjustment
Setting values
1
Mix1
Mix degree for channels 1 and 2
0.00 to 100.00