Ripple settings – Sony Multi Interface Shoe Adapter User Manual
Page 508
Cha
508
DME Special Effect Operations
5 (CIRCLE): Circular wave
6 (CUBIC): Cubic wave
Ripple settings
There are four modes: Radial, Angular, Both, and Shape. The direction of
modulation differs depending on the mode. You can set the size and frequency
of the ripples, their direction and speed, their center point, and other
parameters. In Shape mode, you can select ripple shapes other than circles
(stars, etc.).
To apply the Ripple effect
With the Ripple menu displayed, use the following procedure.
1
In the
Radial:
Points on radii of the same length from the center of the ripples
behave in the same way.
Angular:
Points at the same angle from the center of the ripples behave in
the same way.
Both:
Both Radial and Angular ripples are applied.
Shape:
The ripples can have shapes such as stars or hearts in addition to
circles.
Modulation modes and directions
2
Set the following parameters, depending on the selected modulation mode.
• When Radial mode is selected
Modulation along radii
(Radial mode)
Modulation along periphery
(Angular mode)
Knob
Parameter
Adjustment
Setting values
1
Amp R
Ripple amplitude along radius
0.00 to 100.00
2
Freq R
Ripple frequency along radius
0.00 to 100.00
3
Offset R
a)
Direction along radius in which
to offset ripple phase and
amount of movement
–8.000 to +8.000
c)
–32.000 to +32.000
d)